A complete underfloor heating system for your home.
Advantages at a glance
Low construction height: floor and wall heating from 30 mm of total height, including insulation.
Full aluminum cladding: fast and uniform heat transmission to the environment.
High-quality insulation: minimal heat loss to the subsoil.
Lightweight and stable: ideal for renovations, modernizations and old buildings.
Predefined omega-shaped pipe channels: underfloor heating installation without complicated measurements, staples or clips.
Pre-designed break lines: quick adaptation without tools.
Folded sheet metal edges: no sharp edges or risk of damage.
Heating elements without cavities: less footstep noise.
IDEL EPS heating elements are installed floating and, depending on the configuration, can also be glued in place. Further information can be found in the selected load distribution layers.
Distributor circuit not included (see Regulation/Distributor section).
Tube diameter: 16 x 2.00 mm Material: EPS WLG 035 DEO Thermal conduction plate: Aluminum 0.25 mm Thermal conductivity: Aluminum: 200 W/mK, Insulation: 0.035 W/mK Thermal resistance: 0.86 m² K/W Compressive strength (according to DIN EN 826): 200 kPa at 10% compression Building material class: B2 Construction height: 30 mm plus floor covering Suitable flooring options: Vinyl flooring (design), tiles, wood flooring, laminate, linoleum, fiber carpet, parquet, PVC, rug, vinyl Surface load / point load: 2.0 kN/m² | 2.0kN
